WYBOT A1 + F1 Bundle — Floor Cleaner & Solar Skimmer
Description
This bundle pairs the WYBOT A1 floor cleaner with the WYBOT F1 solar surface skimmer. The A1 cleans the floor only and needs a flat floor, with any slope under 15°, in pools up to 1,076 sq ft.
The cleaner works below the surface, and the F1 skims leaves, pollen, and bugs off the top before they sink, so less reaches the floor between cleans. The pair does the most on pools near trees or heavy pollen. Each unit is also sold on its own.
Shipping and Delivery
Delivery: Free standard shipping within the 48 contiguous states, by ground parcel. Orders usually leave within 1 to 2 business days. We do not ship to Alaska or Hawaii.
Key Features
Floor only: Cleans the pool floor. It does not climb walls or clean the waterline.
Pool size: Up to 1,076 sq ft, with up to 120 minutes on a charge and 2 to 2.5 hours to charge again.
Pickup: Two drive motors and two scrapers, 2,140 gallons per hour of suction, and a 180 μm filter with a fine cotton foam liner.
Edges: An edge cleaning routine works along the base of the walls.
Run times: Set a run of 120, 60, 40, or 30 minutes, and repeat it up to four times over seven days.
Controls: Buttons and a battery light on top. There is no app.
Surface skimming, F1: Floats on the water and collects leaves, pollen, and bugs before they sink, into a 7 L (1.8 gal) basket.
Solar power, F1: A 33 W panel charges it as it works. Smart mode runs for 24 hours, 10 minutes on and 10 off, and Standard mode for 8 hours straight.
Product Specifications
| WYBOT A1, pool size | Up to 1,076 sq ft |
| WYBOT A1, cleans | Floor only |
| WYBOT A1, pool floor | Flat, slope under 15° |
| WYBOT A1, runtime | Up to 120 min |
| WYBOT A1, charge time | 2 to 2.5 h |
| WYBOT A1, suction | 2,140 GPH |
| WYBOT A1, filter | 180 μm with cotton foam |
| WYBOT A1, water depth | Up to 8.2 ft |
| WYBOT A1, shipping weight and box | 11.27 lb, 17.3 x 13.7 x 7.8 in |
| WYBOT F1, run time | 24 h in Smart mode, 8 h in Standard mode |
| WYBOT F1, solar panel | 33 W |
| WYBOT F1, basket | 7 L (1.8 gal), 180 μm filter |
| WYBOT F1, shipping weight and box | 16.1 lb, 21.2 x 20.8 x 11 in |
What's Included
WYBOT A1: The A1 robot and its charger.
WYBOT F1: The F1 skimmer.
Installation and Compatibility
WYBOT A1: In-ground and above-ground pools with a flat floor, slope under 15°, up to 8.2 ft deep. For walls or a sloped deep end, choose the B1 or C1 bundle instead.
WYBOT F1: Any pool with an open water surface. It skims the surface only.
App: The F1 uses the WYBOT app for iOS 15.0 or later and Android 8.0 or later, over Bluetooth. The A1 has no app.
Before the first run: Charge the cleaner fully.
Warranty
Term: 1 year on each unit against defects in materials and workmanship under normal use. Filters, brushes, wheels, rollers, and other wear parts are covered only for defects on delivery.
Not covered: Water damage from a cover, cap, or charging port left open, running it out of the water, unbalanced pool chemistry or corrosion, impact, and third-party repairs.
Claims: Contact us first, with your proof of purchase, the serial number, and photos or video of the fault. You pay shipping to send a unit in for evaluation, and return shipping on an approved repair or replacement is covered.
Returns: Within 30 days of delivery, under our return and refund policy. A change-of-mind return carries a 25% restocking fee, and you pay the return shipping. Neither applies to an item that arrives damaged, defective, or incorrect.
Frequently Asked Questions
Does the F1 replace the cleaner?
No. The F1 skims the surface, and the cleaner works below it.
Does the A1 clean walls?
No. It cleans the floor only. The B1 and C1 bundles clean walls too.
Will it handle a sloped deep end?
Only if the slope is under 15°.
Can I buy the units separately?
Yes. Each one is sold on its own.
Shipping & returns
Returns follow the stated return window — see returns & exchanges. Freight returns are arranged by our team.
Outdoor Robots · WYBOT bundle
The simple pair for a simple pool
The A1 works the flat floor on a timer, up to four runs a week; the F1 keeps the surface clear on solar power. For a flat-bottomed pool, the two cover the ground where debris actually collects — the bottom it sinks to and the surface it lands on.
In the kit
- WYBOT A1Floor cleanerFloor only, flat bottoms with slope under 15° — dual-motor drive, 180 μm filtration, edge-enhanced cleaning, self-parking. 1-year warranty.
- WYBOT F1Surface skimmerSolar-powered — Smart mode patrols 24 h at 10 min on/off; EdgeMaster edge cleaning, 1.8 gal (7 L) no-backflow basket. 1-year warranty.
The A1 does not climb walls — a pool with walls and a waterline worth cleaning wants the B1 or C-series bundles instead.
Full specifications for each unit are on its own product page. 30-day returns on both units.
Who it is for
For a flat-bottomed pool that collects leaves
The A1 cleans the flat floor and the F1 skims the surface, so anything the F1 catches is debris the A1 never has to deal with. Read the limit first: the A1 does not climb walls or clean the waterline, and it needs a slope under 15°. If that is not your pool, the B1 or C1 pairing is the right one.
A1: floors under about 1,076 sq ft
Up to 120 minutes continuous, with a 180 μm filter.
A1: four runs a week
A cycle timer, with self-parking at the end.
F1: 33 W solar panel
Up to 24 hours in Smart mode, with no cords and no charging routine.
F1: 1.8 gal (7 L) basket
EdgeMaster steering runs it along the pool edges.
Plain answers
Will this clean my walls?
No. The A1 is a floor cleaner. It needs a flat bottom and does not climb walls.
Can I buy just one?
Yes. The A1 and the F1 are each sold on their own.
Before you order
Free standard shipping within the 48 contiguous states. Orders usually leave within 1 to 2 business days. We do not ship to Alaska or Hawaii.
Both units carry a 1-year WYBOT warranty. Returns within 30 days of delivery under our return and refund policy. A change-of-mind return carries a 25% restocking fee and return shipping.
