Beatbot
Beatbot AquaSense 2 Pro AI Robotic Pool Cleaner
Beatbot AquaSense 2 Pro AI Robotic Pool Cleaner
Couldn't load pickup availability
Share

Your pool robot probably does one job. This one does five.
Most cordless cleaners scrub the floor and stop there. You still skim the surface by hand, still scrub the waterline, still add clarifier when the water goes cloudy. The AquaSense 2 Pro handles all of it in a single session — floor, walls, waterline, water surface, and clarification — then parks itself at the edge so you can lift it out without fishing around with a pole.
Built for pools that actually get used
An 11-hour surface runtime means it can work through a full day of leaf fall without a charge. On floor cleaning you get around five hours, and the same on walls and waterline. The 13,400 mAh battery covers a surface area up to roughly 3,875 square feet in a single session, which is more pool than most homes have.
It maps before it cleans
Twenty-two sensors, two of them ultrasonic, scan the pool and build a route before the robot commits to it. That means fewer missed patches and less repeated ground. It reads stairs, drains and ladders without bumping into them to find out they’re there — which matters on a tiled step edge you’d rather not have scraped.
Clearer water without the guesswork
The ClearWater system releases a clarifying agent during the clean, binding fine particles so the filter can catch them. No measuring, no separate dosing step, no waiting for the chemistry to settle before anyone swims.
Surface control from your phone
While it’s on the surface you can drive it directly from the app — steer it toward the corner where everything collects after a windy afternoon, adjust speed, or send it back to the edge with one tap.
Will it work in my pool?
- In-ground and above-ground pools both supported
- All standard pool surfaces and shapes
- Recommended for pools up to approximately 360 m² / 3,875 sq ft
Specifications
| Specification | Detail |
|---|---|
| Cleaning modes | Floor, walls, waterline, water surface, water clarification |
| Battery | 13,400 mAh |
| Surface runtime | Up to 11 hours |
| Floor runtime | Up to 5 hours |
| Wall and waterline runtime | Up to 5 hours |
| Navigation | CleverNav with SonicSense ultrasonic mapping |
| Sensors | 22 total, including 2 ultrasonic |
| Processor | Quad-core |
| Weight | 25.08 lb |
| Filtration | Dual-layer polyester, 150 μm outer / 250 μm inner |
| Warranty | 2 years, handled by Beatbot |
Ordering and delivery
Ships from a US warehouse, typically within two business days, with tracking on every order. Returns accepted within 30 days — no return label fee and no restocking charge. Two-year manufacturer warranty.
Questions people ask before buying
Is this better than a Dolphin?
Different design. Dolphin robots are corded and generally cheaper to buy; this is cordless with no hose to manage and no pump to run, and it cleans the surface as well as the floor. If you want a floor-only cleaner at the lowest price, a corded unit wins. If you want one machine that replaces the skimming and the scrubbing too, this is the case for spending more.
Do I still need to skim?
Not for routine debris. Surface cleaning is one of the five modes and it has the longest runtime of any of them.
What happens when the battery runs low?
It returns to the water surface so you can retrieve it easily rather than reaching to the bottom of the deep end.
Is it hard to lift out?
It drains water as it comes out, so you’re lifting the robot rather than the robot plus several litres of pool.
Do I need a professional to install it?
No. There’s nothing to install. Charge it, drop it in, start it from the app.
Compare the AquaSense range
| 2 Pro — $1,899 | 2 Ultra — $2,299 | X — $4,250 | |
|---|---|---|---|
| Best for | Standard pools, daytime cleaning | Freeform pools, heavy leaves, overnight | Least hands-on ownership |
| Self-cleaning | No | No | Yes |
