Beta C45PRO 2.0

Two generations, one name

Beta currently markets the C45PRO in a 2.0 generation built around a 61.5 cm worktop. The three C45PRO systems on our price file — items 045000033, 045001997 and 045001998 — are the earlier 49.5 cm generation.

Both are real products. They are not the same range, and the modules do not carry across the depth change. Mixing them in one run leaves a 12 cm step in the worktop, so if you are extending cabinets you already own, measure them before ordering anything.

What goes in the run

  • Beta C45PRO 2.0 stainless steel worktop

    Stainless over MDF

    The 2.0 worktop is MDF faced in stainless steel: stain and corrosion resistant, and easy to wipe down. For a bay where fluids, solvents and hot parts land on the surface, that facing is the practical argument over bare wood.

  • Beta C45PRO 2.0 mobile seven-drawer unit on wheels

    A drawer unit that follows you

    Seven drawers on 100 mm wheels, so the drawers go to the job instead of the job walking back to the wall. Beta cuts EVA and ABS trays specifically for 2.0 drawers.

  • Beta C45PRO 2.0 two-door storage cabinet

    Closed storage

    Two-door cabinets and wall units for what does not belong in a drawer, keeping the worktop clear. Perforated panels put hand tools in reach above the bench.

The three Beta systems, compared

  • C45PRO 2.0

    • Worktop 61.5 cm
    • Stainless-coated MDF
    • No corner module in range
    • Drawers 588 x 367 mm
    • Mobile 7-drawer unit on 100 mm wheels
    • Special order, 6 to 8 weeks
    You are here 

  • RSC50 2.0

    • Worktop 70 cm
    • Sheet metal, multi-ply wood or stainless-coated MDF
    • Self-supporting corner module
    • Drawers 588 x 367 mm
    • Made in Italy
    • Special order, 6 to 8 weeks
    See the RSC50 2.0 

  • C58BC

    • Worktop 75 cm
    • Multi-ply wood or stainless-coated MDF
    • Standalone benches, not a system
    • Drawers built into the bench
    • Origin not stated by Beta
    • Special order, 6 to 8 weeks
    See the C58BC 

Stocked today, special order for the 2.0

The C45PRO systems we can ship now are the previous generation at 49.5 cm deep, held in Beta's Pennsylvania warehouse, so they move on normal timescales. See the range we carry today.

The 2.0 range with the 61.5 cm worktop is built to order in Italy on a six to eight week cycle. If the garage work is happening this season, agree the specification now and place the order early.

Before you commit

What does a C45PRO 2.0 combination cost?

Beta has not issued us a US list for this range, so the figure below is indicative rather than a quote. It is derived from current European trade pricing for the same items, checked against the US list we already hold for Beta's stocked lines. We confirm the real number in writing before you order.

As a planning range, most preassembled C45PRO 2.0 combinations land between $6,400 and $10,800, depending on module count and worktop. The earlier C45PRO we hold in US stock is priced on its own product page, and that figure is firm.

C45PRO 2.0 or RSC50 2.0?

Same idea at two depths and two price points. Take C45PRO 2.0 when the wall is shallow, the budget is defined and a straight run does the job. Take RSC50 2.0 when you want the extra 8.5 cm, a choice of worktop materials, or a corner that turns properly.

Can I add 2.0 modules to my existing C45PRO?

Not without a visible step in the worktop. The generations are 49.5 cm and 61.5 cm. If you are extending, either match the generation you own or replace the run.

Request a written quote

Worktop length, module mix and drawer layout is enough for us to come back with a specification and a firm figure.

Request a quoteSee the C45PRO in stock